This machine is suitable to produce max. 120mm neck size Jar bottle.
Features:
1. High safety, high speed with high efficiency.
2. Manual saving, one man is enough for operation the machine.
3. Stable performing with easy maintaining.
4. Imported PLC controller and man-machine interface computer.
5. Japan Omron inspection sensor.
6. Adopt the new type double bend arm and four pull rod-clamping structure (won the patent): Cross direction, Middle mould board is move parallel. The distance between two mold boards is adjusted by the chain wheel. Thus, the clamping force is very strong. Power saving design can increase your profits.
7. Segregate type air controlling system, which is designed for avoiding waste pollution.
Technical Parameter:
JG-1C120MM PET Blow Molding Machine
|
Container Specification
|
Electricity & Air System
|
Chiller Water & Machine Dimension
|
Theoretical output
|
800pcs/hr
|
Total power
|
25Kw
|
Operating pressure
|
0.3-0.5Mpa
|
Max. container volume
|
5L
|
Use power
|
15Kw
|
Temperature
|
10-12℃
|
Max. neck diameter
|
120mm
|
Working pressure
|
1.0Mpa
|
Flow rate
|
30L/min
|
Max. container diameter
|
200mm
|
Low pressure consuming
|
1400L/min
|
Machine dimension
|
2.5×1.5×2.0m
|
Max. container height
|
320mm
|
Blowing pressure
|
≤3.5Mpa
|
Machine weight
|
1900kg
|
Number of cavity
|
1cavity
|
High pressure consuming
|
1200L/min
|
|
|
|