2009/11/25 9:37:06
Listen up, please: This is going to make your life easier. It might even save your job or company. We’re going to talk about drying, and even if you’ve heard it all before, my experience tells me maybe it didn’t all sink in.Why do you have to dry plastic in the first place? You’re right, to get rid of the moisture. But why does the moisture have to be taken out before proce……
2009/11/21 9:03:55
The following steps represent a major refurbishment that will increase tooling life and reduce the cost of manufacturing and secondary operations in molding facilities. Sample the tool prior to starting any work to review parts for flash or areas where the part may stick or need additional polishing; every function of the actions or components, part ejection, electrical, hydraulic, hot manifol……
2009/11/19 9:43:02
With its considerable cost savings and reduction in personnel and time, ultrasonic cleaning is a natural corollary to lean manufacturing for the moldmaking industry. In terms of parts cleaning, the most efficient answer for lean manufacturing is the use of ultrasonic tanks. With ultrasonic cleaning, parts to be cleaned are placed in a chamber or tank containing an environmentally-friendly, water-b……
2009/11/18 9:26:53
Silicones have been developed that provide primer-less adhesion to a variety of thermoplastic resins and are optimal for multi-component silicone-to-plastic molding as they adhere to the thermoplastic substrate (plastic inserts), but not to the metal surface of the mold. For the mold manufacturer, this means no mold release coating or re-coating is required—saving time and money.Shin-Etsu Si……
2009/11/18 8:44:27
This group of companies delivers a full-systems approach to manufacturing—art to part and every-thing in between.The Berrien Tooling Coalition (BTC) of Southwest Lower Michigan—a group of 19 companies—aims to deliver a full systems approach to mold manufacturing by providing a one-stop shop for its customers to save them time and money. The BTC provides an array of services, incl……
2009/11/12 9:34:53
So you think a can is a can is a can? Then you probably never heard of Plastican. Since its founding in 1970 by the Clementi family in Leominster, Mass., Plastican has established a leading position in open-head pails with a line of products that demonstrate more innovation than one might expect in a so-called commodity processing operation.Leominster is the largest of four Plastican plants and is……
2009/11/11 11:21:03
Q. We are molding long automotive parts that are to be chrome plated. These parts have long flow paths and require sequential valve gating to fill properly. But the parts often have surface marks that cause visible flaws after plating, resulting in high rates of expensive scrap. How do we fix this?—German automotive injection molder A. Sequential valve gati……
About | Services | SiteMap | Contact Us | Links | Blog | 官方博客 | Help | 成为付费会员 Toll free : 400-686-6812 Email: info[AT]imould.com
Copyright © 2009 By Skynet Co.,Ltd All rights reserved Link Exchange with imould |