2010/3/4 13:49:44
Making a proper short shot is an important aspect of practicing “scientific molding.” Upon startup of almost any mold, the first step is to make a short shot. Why? The list of reasons is longer than you might think: For your own safety. To prevent damage to the mold from overpacking if you set shot size incorrectly. To confirm that the cutoff or switchover position from firs……
2010/1/13 8:54:15
Vented or two-stage screws only make sense when volatiles must be removed in order to make a satisfactory product. These screws have a number of disadvantages that are offset only if volatile removal is essential to proper operation. First and foremost is the problem of vent leakage. Second is a loss of output due to the need to design the screw to accommodate an open vent. Third, there is always ……
2010/1/12 8:49:39
Three new multi-shot tooling concepts that involve stationary cavities and indexing cores use injection overmolding to eliminate post-mold welding operations and improve part quality and productivity while reducing scrap. One approach brings part assembly into the press. Another produces thick-wall parts in less time by building up the part in the mold from successive layers of material. And a thi……
2010/1/11 10:14:27
There’s increasing interest in the benefits of aluminum tooling for higher volume injection molded applications, especially in automotive. Our firm has been involved with aluminum tooling for prototype and production applications since the early 1990s, and more recently we began to apply that knowledge to the automotive industry.Just over five years ago, our company, and later some others, b……
2009/12/25 9:20:19
Full-color mold plaques have been developed for the North American tooling and plastics industries that identify a mold or die’s parts quickly and easily—saving engineering time and money.The plaques—introduced by mold component supplier DMS (Oldcastle, ON) in conjunction with ICS Laser Technologies (Windsor, ON)—feature thermal set graphics. According to DMS North American……
2009/12/23 9:47:59
After acquiring its key competitor earlier this year, it didn’t take long for officials at U.S. Block Windows to recognize that logistics issues plus their own low-cost captive molding capacity were reason enough to pull molds from a Chinese processor and bring them to its own captive molding facility in western Florida. The company also pulled some extrusion tooling from overseas and now ha……
2009/12/23 9:46:02
In 1999, not long after the collapse of many of the large service bureaus that provided rapid prototyping during the 1990s, Ron Hollis founded Quickpartsimould.com as a custom manufacturing service for engineers and designers who wanted parts (you guessed it) quickly.Quickpartsimould.com has risen rapidly within the new generation of service bureaus offering rapid prototyping (SLA, SLS, FDM, Polyj……
About | Services | SiteMap | Contact Us | Links | Blog | 官方博客 | Help | 成为付费会员 Toll free : 400-686-6812 Email: info[AT]imould.com
Copyright © 2009 By Skynet Co.,Ltd All rights reserved Link Exchange with imould |